Pick a coal stock–any coal stock–and it’s likely that those shares have been pounded this year. That’s made some analysts consider whether they’re cheap enough to buy. UBS thinks its time to consider bankruptcy, even if its not a near-term concern.
BloombergHow bad have the losses been this year? Peabody Energy (BTU) is down 9.5% so far in 2014, while Arch Coal (ACI) is off 16%. Alpha Natural Resources (ANR) has plunged 48% and Walter Energy (WLT) had plummeted 66%.
UBS analyst Kuni Chen explains why now’s a good time to start thinking about bankruptcy in the coal sector:
Since 2012, we have seen Patriot Coal and James River file for bankruptcy protection. There continues to be signs of mounting financial distress in the coal sector with some tranches of Walter paper trading at 60 cents on the dollar. Alpha and Arch paper is trading a bit better in the 70-80 range for unsecured debt. With yields approaching the mid-teens percentages for Arch Coal/Alpha Natural Resources paper, the bonds are edging closer to distressed levels. Meantime, the equities continue to be weak with Walter Energy down almost 70% in the last 12 months and Alpha Natural Resources down 40% vs. the S&P 500 +14%. While there does not appear to be any imminent bankruptcy risk, we want to discuss the potential event path to a next potential liquidity crisis looking ahead 2-3 years. Within our coverage universe, the companies with the most financial leverage include Alpha Natural, Arch Coal, and Walter Energy.
Hot Internet Companies To Invest In 2015: Real Goods Solar Inc (RGSE)
Real Goods Solar, Inc., incorporated on January 29, 2008, is a solar energy company. The Company serves commercial, residential, and utility customers. The Company provides a solar solution, from design, financing, permitting and installation to ongoing monitoring, maintenance and support. The Company offers free home solar quotes, as well as solar system financing, design, engineering, permitting, installation, rebate acquisition, maintenance, and monitoring. Effective May 14, 2014, the Company acquired Elemental Energy LLC, doing business as Sunetric.
The Company�� solar power installation services are available in California, Colorado, Connecticut, Delaware, Massachusetts, Missouri, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, and Vermont. The Company's customers include homeowners, small to large businesses and corporations, universities and schools, and government agencies, such as Aetna Insurance, Stop & Shop, Timex, St. Louis Housing Authority, and Yale University.
Advisors' Opinion:- [By Peter Graham]
The Q3 2014 earnings report for mid cap solar stock SolarCity Corp (NASDAQ: SCTY), a potential peer of small caps Vivint Solar Holdings Inc (NYSE: VSLR) and Real Goods Solar, Inc (NASDAQ: RGSE), is scheduled for after the market's close on Wednesday (November 5th). Aside from the SolarCity Corp earnings report, it should be said that Vivint Solar Holdings Inc is scheduled to report Q3 2014 earnings after the market close on Monday (November 10th) while Real Goods Solar, Inc reported delayed Q2 2014 earnings on August 19th (a wider quarterly loss led to the ousting of its CEO with the company saying it will�focus on residential rooftops rather than money-losing commercial installations). SolarCity Corp has gotten extra investor attention as its CEO is Lyndon Rive while�the company���chairman is�his cousin, Tesla billionaire Elon Musk.
- [By Anna Prior]
Real Goods Solar Inc.(RGSE) said it has agreed to raise about $7 million in a private placement financing transaction. Under the terms of the agreement, RGS will issue units consisting of an aggregate of about 2.9 million shares of its Class A common stock and warrants to purchase up to 1.31 million additional shares, at a price of $2.40 a unit. Shares fell 9.7% to $2.62 premarket.
Best Energy Stocks To Buy Right Now: Awilco Drilling PLC (AWLCF)
Awilco Drilling PLC is a United Kingdom-based drilling contractor. The Company�� principal business is to own offshore drilling rigs for use in offshore drilling for oil and gas, and to provide drilling services for oil and gas companies using these rigs. The Company operates two semi-submersible drilling rigs: WilHunter, previously Arctic IV and WilPhoenix, previously Arctic II. As of December 31, 2011, the Company wholly owned five subsidiaries, namely WilPhoenix (UK) Ltd, WilHunter (UK) Ltd, WilPhoenix (Malta) Ltd, WilHunter (Malta) Ltd and the Singapore-based Awilco Drilling Pte Ltd. As of December 31, 2011, Awilco Drilling AS was the Company's largest shareholder and controlled 49% shares. Advisors' Opinion:- [By Ben Levisohn]
We expect Caledonia to generate close to $600M in EBITDA. While RIGs mid-water OPEX has averaged about $125k/d we expect it to be lower at Caledonia. 2015 Consensus EBITDA for RIG is ~$3B which means 20% of RIGs 2015 EBITDA comes from the rigs that will become Caledonia. The problem (in a bear market) is that companies with lower end rigs trade at a discount ��just ask Awilco (AWLCF), Fred Olsen Energy, and Paragon Offshore (PGN) which trade at an average multiple of 3.3x on 2015 EBITDA versus RIG which trades at 6.3x.
Best Energy Stocks To Buy Right Now: Cameron International Corp (CAM)
Cameron International Corporation (Cameron), incorporated on November 10, 1994, provides flow equipment products, systems and services to worldwide oil, gas and process industries. Cameron operates in three business segments: Drilling and Production Systems (DPS), Valves & Measurement (V&M) and Process & Compression Systems (PCS). The DPS segment includes businesses, which provides systems and equipment used to control pressures and direct flows of oil and gas wells. The V&M segment includes businesses, which provides valves and measurement systems used to control, direct and measure the flow of oil and gas as they are moved from individual wellheads through flow lines, gathering lines and transmission systems to refineries, petrochemical plants and industrial centers for processing. The PCS segment includes businesses, which provides standard and custom-engineered process packages for separation and treatment of impurities within oil and gas and compression equipment and aftermarket parts and services to the oil, gas and process industries. During the year ended December 31, 2011, it acquired LeTourneau Technologies, Inc. (LeTourneau) from Joy Global Inc. During 2011, it acquired Vescon Equipamentos Industrias Ltda. During 2011, it acquired 51% interest in Newmans Valves. In September 2012, TTS Group ASA sold its drilling equipment business to the Company. Effective August 5, 2013, Cameron International Corp acquired a 75% interest in Douglas Chero SpA, from Consilium SGR SpA.
Drilling & Production Systems Segment
Cameron�� products are employed in a range of operating environments, including basic onshore fields, complex onshore and offshore environments, deepwater subsea applications and ultra-high temperature geothermal operations. The products within this segment include surface and subsea production systems, blowout preventers (BOPs), drilling and production control systems, block valves, gate valves, actuators, chokes, wellheads, manifolds, drilling risers, top drive! s, mud pumps, other rig products and aftermarket parts and services. In addition, the DPS segment designs and manufactures structural components for land and offshore drilling rigs. The segment�� businesses also manufacture elastomers, which are used in pressure and flow control equipment and other petroleum industry applications, as well as in the petroleum, petrochemical, rubber molding and plastics industries. The businesses within this segment market their products directly to end-users through a worldwide network of sales and marketing employees, supported by agents in some international locations. Customers include oil and gas majors, national oil companies, independent producers, engineering and construction companies, drilling contractors, rental companies and geothermal energy producers. The businesses included in this segment are Drilling Systems, Surface Systems, Subsea Systems and Flow Control.
Drilling Systems is a global supplier of integrated drilling systems for onshore and offshore applications. Drilling equipment designed and manufactured includes ram and annular BOPs, control systems, drilling risers, drilling valves, choke and kill manifolds, diverter systems, top drives, draw works, mud pumps, other rig products and aftermarket parts and services. The products are marketed under the Cameron, Guiberson, H&H CUSTOM, H&H, Melco, LeTourneau, Lewco, OEM and Townsend brand names. Surface Systems is a global market in supplying surface production equipment, from conventional to high-pressure, high temperature (HPHT) wellheads, production systems and controls, block valves, gate valves, mudline systems, dry completion systems and aftermarket parts and services. The products are marketed under the Cameron, Camrod, IC, McEvoy, Precision, SBS, Tundra, Willis and WKM brand names. Cameron, which has a global base of installed equipment and an aftermarket presence in hydrocarbon-producing region worldwide, is the provider of surface production equipment. Surface Systems added new s! ales and ! aftermarket facilities in the Marcellus, Eagle Ford and Haynesville shale regions.
Subsea Systems is a provider of subsea wellheads, production systems and controls, manifolds and aftermarket parts and services to customers worldwide, from basic subsea tree orders to integrated solutions, as well as installation and aftermarket support. These products are marketed under the Cameron, Mars, McEvoy and Willis brand names. Flow Control provides chokes, actuators, gears, valve accessories and automation solutions to other Cameron businesses, as well as to other industry manufacturers and directly to end users under such brand names as Cameron, Dynatorque, Ledeen, Maxtorque, Test and Willis. Flow Control has expanded its subsea chemical injection metering valve (CIMV) product line, introducing a high-flow CIMV.
Valves & Measurement Segment
Cameron�� products include gate valves, ball valves, butterfly valves, Orbit valves, double block & bleed valves, plug valves, globe valves, check valves, actuators, chokes and aftermarket parts and services, as well as measurement products such as totalizers, turbine meters, flow computers, chart recorders, ultrasonic flow meters and sampling systems. This equipment and the related services are marketed through a worldwide network of combined sales and marketing employees, as well as distributors and agents in selected international locations. Customers include oil and gas majors, independent producers, engineering and construction companies, pipeline operators, drilling contractors and major chemical, petrochemical and refining companies. The businesses included in this segment are Distributed Valves, Engineered Valves, Process Valves, Measurement Systems and Aftermarket Services.
Distributed Valves provides a range of valves used in the exploration, production and transportation of oil and gas, with products sold through a network of wholesalers and distributors, primarily in North America and to upstream markets in A! sia-Pacif! ic and the Middle East. These valves are marketed under the brand names Cooper, Demco, Navco, Newco, Nutron, OIC, Techno, Texstream, Thornhill Craver, Wheatley and WKM. Engineered Valves provides a range of customized ball, gate and check valves serving the oil and gas production, pipeline, subsea and liquefied natural gas (LNG) markets. Products are marketed under the brand names Cameron, Entech, Grove, Ring-O, TK and Tom Wheatley.
Process Valves provides valves under the brand names of General Valve, Orbit, TBV and WKM for use in critical service applications that are often subject to extreme temperature conditions, particularly in refinery, power generation, including nuclear, chemical, petrochemical, gas processing and liquid storage terminal markets, including liquefied natural gas (LNG). Measurement Systems designs, manufactures and distributes measurement products, systems and solutions to the global oil and gas, process and power industries. The Company�� main product brand names include Barton, Caldon, Clif Mock, Jiskoot, Linco, Nuflo and PAAI. Aftermarket Services provides preventative maintenance, original equipment manufacturer (OEM) spare parts, repair, field service, asset management and remanufactured products for valves and actuators.
Process & Compression Systems Segment
Integrally geared centrifugal compressors are used by customers worldwide in a range of industries, including air separation, petrochemical, chemical and process gas. Products include oil and gas separation equipment, heaters, dehydration and desalting units, gas conditioning units, membrane separation systems, water processing systems, integral engine-compressors, separable reciprocating compressors, two and four-stroke cycle gas engines, turbochargers, integrally-geared centrifugal compressors, compressor systems and controls. Aftermarket services include spare parts, technical services, repairs, overhauls and upgrades. The businesses included in this segment are Process System! s, Recipr! ocating Compression and Centrifugal Compression.
The process systems businesses provide custom-engineered process packages to oil and gas majors, national oil companies, independent operators and engineering, procurement and construction companies worldwide for separation and treatment of oil, gas, water and solids. Products offered include separators, heaters, dehydration and desalting units, gas conditioning units, membrane separation systems, water processing systems and aftermarket parts and services. PCS markets its process systems products under the Cameron, Consept, Cynara, Hydromation, KCC, Metrol, Mozley, NATCO, Petreco, Porta-test, Unicel, Vortoil and Wemco brand names.
Reciprocating Compression equipment is used throughout the energy industry by gas transmission companies, compression leasing companies, oil and gas producers and independent power producers. Reciprocating Compression products and services are marketed under the Ajax, Cooper-Bessemer, CSI, Enterprise, Superior, Texcentric and TSI brand names. Ajax integral engine-compressors, which combine the engine and compressor on a single drive shaft, are used for gas re-injection and storage, as well as on smaller gathering and transmission lines. Superior-brand separable compressors are used for natural gas applications, including production, storage, withdrawal, processing and transmission, as well as petrochemical processing. These high-speed separable compressor units can be matched with either natural gas engine drivers or electric motors. Reciprocating Compression also provides global support for its products and maintains sales and service offices in key international locations. During 2011, approximately 60% of the Reciprocating Compression revenues were generated by sales of aftermarket parts and services in support of the Company�� worldwide installed base of compression equipment. Customers for Reciprocating Compression products include oil and gas majors, national oil companies, petrochemical and re! fining co! mpanies, midstream natural gas companies, independent power producers and compressed natural gas distribution companies.
Centrifugal Compression manufactures and supplies integrally geared centrifugal compressors and provides aftermarket services to customers worldwide. Centrifugal air compressors, used in manufacturing processes (plant air), are sold under the Turbo-Air. Engineered compressors are used in the process air and gas industries and are identified by the MSG. The process and plant air centrifugal compressors deliver oil-free compressed air and other gases to customers, thus preventing oil contamination of the finished products. Centrifugal Compression also provides installation and maintenance services, parts, repairs, overhauls and upgrades to its worldwide customers for plant air and process gas compressors. It also provides aftermarket service and repairs on all equipment it produces through a worldwide network of distributors, service centers and field service technicians utilizing an extensive inventory of parts marketed under the Joy brand name. Centrifugal Compression customers include oil and gas majors, national oil companies, air separation companies, independent power producers, petrochemical and refining companies, midstream natural gas companies and durable goods manufacturers.
The Company competes with Aker Solutions, Balon Corporation, Circor International, Inc., Dover Corporation, Dril-Quip, Inc., Emerson Process Management, FlowServ Corp., FMC Technologies, Inc., GE Oil & Gas Group, Stream-Flo Industries Ltd., National Oilwell Varco Inc., Zy-Tech Global Industries company, Flotek Industries, Inc., Pibiviese, Robbins & Myers Fluid Management Group, SPX Corporation�� Flow Technology Segment, Tyco International Ltd., Weatherford, Ltd., Ariel Corporation, Compressor Engineering Corporation, Demag, Dresser-Rand Company, FS-Elliott Company LLC, Endyn Energy Dynamics, Hoerbiger Group and IR Air Solutions.
Advisors' Opinion:- [By Monica Gerson]
United Continental Holdings (NYSE: UAL) is estimated to post its Q3 earnings at $1.54 per share on revenue of $10.26 billion. Cameron International (NYSE: CAM) is projected to report its Q3 earnings at $0.83 per share on revenue of $2.59 billion.
- [By Ben Levisohn]
While Schlumberger has a free-cash-flow yield of about 3.5%, Cameron International’s (CAM) and Dril-Quip’s (DRQ) are just over 3% and�FMC Technologies‘ (FTI) is just under 3%. Halliburton (HAL) has a free-cash-flow yield of just over 1%.
Best Energy Stocks To Buy Right Now: Lightstream Resources Ltd (LSTMF.PK)
Lightstream Resources Ltd, formerly PetroBakken Energy Ltd., is a Canada-based oil and gas exploration and production company. The Company�� principal operating areas include southeastern Saskatchewan where it targets the Bakken formation and conventional Mississippian reservoirs, central Alberta, where it is focused on the Cardium formation, and north-central Alberta, where it is engaged in exploring for light oil resource plays. In addition, the Company also has land holdings in the Horn River and Montney plays in northeast British Columbia. On December 31, 2012, Petrobank Energy and Resources Ltd. and PetroBakken Energy Ltd. announced the completion of the reorganization. The Reorganization resulted in a newly incorporated company PetroBakken Energy Ltd. (New PetroBakken). Advisors' Opinion:- [By MLP Trader]
Here are the current top five companies in the list:
CompanySymbolEV/BOEPD/NetbackPrice/NAVEV/DACFPinecrest(PNCGF.PK)53564%4.0XLightstream(LSTMF.PK)131753%4.5XNovus(NOVUF.PK)133290%4.1XZargon(ZARFF.PK)138664%5.6XTwin Butte(TBTEF.PK)155885%5.5XOf the larger companies, one that remains obstinately near the top of the list is Lightstream . Lightstream trades at 40% of its book value and a whopping 13.4% yield.
Best Energy Stocks To Buy Right Now: Markwest Energy Partners LP (MWE)
MarkWest Energy Partners, L.P. (MarkWest Energy) is a master limited partnership engaged in the gathering, processing and transportation of natural gas; the transportation, fractionation, storage and marketing of natural gas liquids (NGLs), and the gathering and transportation of crude oil. It provides services in the midstream sector of the natural gas industry. The Company also provides processing and fractionation services to crude oil refineries in the Corpus Christi, Texas area through its Javelina gas processing and fractionation facility. As of December 31, 2011, the Company operated in four segments: Southwest, Northeast, Liberty and Gulf Coast. Effective December 31, 2011, the Company acquired the remaining 49% interest in MarkWest Liberty Midstream. On February 1, 2011, the Company acquired Langley processing plant.
Southwest Segment
The Company owns a system in East Texas that consists of natural gas gathering pipelines, centralized compressor stations, a natural gas processing facility and an NGL pipeline. The East Texas system is located in Panola, Harrison and Rusk Counties and services the Carthage Field. Producing formations in Panola County consist of the Cotton Valley, Pettit, Travis Peak and Haynesville formations. During the year ended December 31, 2011, approximately 77% of its natural gas volumes in the East Texas System result from contracts with six producers. The Company sells substantially all of the purchased and retained NGLs produced at its East Texas processing facility to Targa Resources Partners, L.P. (Targa) under a long-term contract. Such sales represent approximately 19.4% of its consolidated revenue in 2011.
The Company owns a natural gas gathering system in the Woodford Shale play in the Arkoma Basin of southeast Oklahoma. The liquids-rich natural gas gathered in the Woodford system is processed through Centrahoma Processing LLC (Centrahoma), its equity investment, or other third-party processors. In addition, it owns the Foss Lake! natural gas gathering system and the Western Oklahoma natural gas processing complex, all located in Roger Mills, Beckham, Custer and Ellis Counties of western Oklahoma. The gathering portion consists of a pipeline system that is connected to natural gas wells and associated compression facilities. The Company also owns a gathering system in the Granite Wash formation in Wheeler County in the Texas panhandle that is connected to its Western Oklahoma processing complex. The Company completed the expansion of the Western Oklahoma natural gas processing plant in October 2011.
Approximately 70% of its Oklahoma volumes result from contracts with three producers in 2011. The Company sells substantially all of the NGLs produced in the Western Oklahoma processing complex to ONEOK Hydrocarbon L.P. (ONEOK) under a long-term contract. Such sales represent approximately 13.2% of its consolidated revenue in 2011. The Company owns a number of natural gas gathering systems located in Texas, Louisiana, Mississippi and New Mexico, including the Appleby gathering system in Nacogdoches County, Texas. It gathers a portion of the gas produced from fields adjacent to its gathering systems, including from wells targeting the Haynesville Shale. In addition, it owns four lateral pipelines in Texas and New Mexico.
Northeast Segment
The Company�� Northeast segment assets include the Kenova, Boldman, Cobb, Kermit and Langley natural gas processing plants, an NGL pipeline and the Siloam NGL fractionation plant. In addition, it has two caverns for storing propane at its Siloam facility and additional propane storage capacity under a long-term firm-capacity agreement with a third party. The Northeast segment operations include fractionation and marketing services on behalf of the Liberty segment. The Company owns and operates a crude oil pipeline in Michigan (Michigan Crude Pipeline) providing transportation service for three shippers.
Liberty Segment
The Company pr! ovides na! tural gas midstream services in southwestern Pennsylvania and northern West Virginia through MarkWest Liberty Midstream. It is a processor of natural gas in the Marcellus Shale, with gathering, processing, fractionation, storage and marketing operations.
Utica Segment
Effective January 1, 2012, the Company and The Energy and Minerals Group (EMG) formed MarkWest Utica EMG, a joint venture focused on the development of natural gas processing and NGL fractionation, transportation and marketing infrastructure to serve producers' drilling programs in the Utica shale in eastern Ohio. During 2011, the Utica Segment did not have any operations.
Gulf Coast Segment
The Company owns and operates the Javelina processing facility, a natural gas processing facility in Corpus Christi, Texas that treats and processes off-gas from six local refineries operated by three different refinery customers. As of December 31, 2011, the Company owned a 40% interest in Centrahoma Processing LLC (Centrahoma), a joint venture with Cardinal Midstream, LLC (Cardinal). Centrahoma owns certain processing plants in the Arkoma Basin and Cardinal operates an additional processing plant that is not owned by Centrahoma but is located adjacent to and operates in conjunction with the Centrahoma plants.
Advisors' Opinion:- [By Matt DiLallo]
Moving Marcellus gas
In Summit's second deal it is purchasing the Mountaineer Midstream gas-gathering system in the Marcellus from MarkWest (NYSE: MWE ) �for�$210 million.�The newly constructed 40-mile system leads into MarkWest's Sherwood Processing Complex which is currently being expanded from 400 million cubic feet per day to 800 million cubic feet per day of processing capacity. The system Summit is acquiring is secured by a long-term, fee-based contract with Antero Resources. Again, the company is picking up an asset that has secured revenue while providing MarkWest with capital so it can grow its processing capacity. - [By Greg Madison]
On the supply side, Gulfport Energy Corp. (Nasdaq: GPOR) has contracted with Dominion Resources Inc. (NYSE: D) subsidiaries Dominion East Ohio and Dominion Transmission to transport the Utica natural gas from the Markwest Energy Partners LP (NYSE: MWE) gas-processing facility in Cadiz, Ohio, out to the wider American Midwest. And, like Chesapeake and American Energy Partners, Gulfport owns land, which it is exploring as well.
Gulfport has some of the most diversified sources in Ohio, with 43% of its land atop dry gas, 27% atop condensates, 22% in the wet gas zone, and just 8% atop oil. Gulfport has started 24 wells in 2013 so far. - [By Matt DiLallo]
In Magnum Hunter's two core operating areas, the Williston Basin and the Appalachian Basin, it has felt this impact directly. The company has been forced to endure production shut-ins because critical midstream assets, like those now in service by MarkWest (NYSE: MWE ) , weren't yet available. Further, in order to access MarkWest's plants, Magnum Hunter has been building the pipeline infrastructure critical to connect its gas to these plants. As seen in the map below, Magnum Hunter's Eureka Hunter Pipeline is providing it with critical access to MarkWest's new Mobley plant:
Best Energy Stocks To Buy Right Now: Pacific Drilling SA (PACD)
Pacific Drilling S.A., incorporated on March 22, 2011, is an international offshore drilling Company. The Company is a provider of ultra-deepwater drilling services to the oil and natural gas industry through the use of high-specification drilling rigs. The Company�� primary business is to contract its ultra-deepwater drilling rigs, related equipment and work crews, primarily on a dayrate basis, to drill wells for its customers. The Company is primarily focused on the ultra-deepwater market. The Company generally consider ultra-deepwater to begin at water depths of more than 7,500 feet and to extend to the maximum water depths, in which rigs are capable of drilling, which is approximately 12,000 feet.
The Company operates four drillships and has four drillships under construction, two of which are under customer contract. In connection with the Restructuring, the Company�� Predecessor was contributed to a wholly owned subsidiary of the Company by a subsidiary of Quantum Pacific International Limited.
Advisors' Opinion:- [By Aaron Levitt]
Management recently announced a hefty 50% hike in its quarterly dividend to 37.5 cents per share of NE stock. And with a 4.8% dividend yield, NE stock is now one of the best-paying dividend stocks in the energy sector.
Dividend Stocks To Buy #5 — Pacific Drilling (PACD)Estimated Dividend Yield: 6.5%
No comments:
Post a Comment